Brother DCP-1510 driver

The classic Brother DCP-1510 printer has an inbuilt laser technology with an electrophotographic laser printing technology. The model belongs to a similar family series as the DCP-1512, MFC-1810, and MFC-1815 printers. The input power source of the printer is about 220 to 240 volts of alternating current at a frequency of 50/60 Hz.

Brother DCP-1510 driver Supported Windows Operating Systems

Brother DCP-1510 driver Supported Mac Operating Systems

Specifications

The average power consumption of the device at peak performance is approximately 1080 watts, and printing takes about 380 watts. All of the parameters of the power consumption are at an average temperature of 25⁰C. The active mode uses up to 40 watts of power and the at deep sleep uses approximately 0.8 watts.

The physical measurements of the printer have its width to be 385 mm, the depth is 340 mm, and the height of the device is 255 mm. Similarly, the weight of the printer is about 7.0 kg which makes it light enough for all the needed uses. There are critical, required environmental conditions under which the printer performs optimally. One of such include a temperature range between 10 to 32.5⁰C for operation and 0 to 40⁰C for storage.

The main channel of connectivity that this printer has is the hi-speed USB 2.0 port with which the manufacturer recommends a USB cable that is not longer than 2 meters in length. The scanning function takes only one sheet at a time without the automatic document feeder (ADF). This scanner glass has a range up to 300 m and a width that is up to 215.9 mm as well as a weight of 2.0 kg.

The copying width at maximum is 210 mm while the multicopy or stack can take up to 99 copies. The zoom range for reduction or enlargement is 25% and 400% respectively with gradual increments. The copy resolution also is about 600 x 600 dpi while the output time for the first page is less than 16 seconds at a temperature of 23⁰C and 230 volts. Download Brother DCP-1510 driver from Brother Website

[Installation Instructions] How to Download / Installation procedure

Note: Do not connect the USB cable until requested by the installer. If you connect to the network, make sure the network cable is connected before running the installer

Windows

• Close all software programs running on your computer.
• Turn on the printer.
• Click the Download button on this page.
• Click the downloaded file. The files will be extracted and the installation process will automatically begin.
• Follow the instructions on the screen to continue and complete the installation.

Mac

• Download the file. For the location where the file is saved, check the computer settings.
• Double-click the downloaded file and mount it on the Disk Image.
• Then Double-click the mounted Disk Image.
• Double-click the packaged file in the folder. Installation starts automatically.

To install later, select Save in step 4 and choose a location on your hard disk. When ready to install, search and double-click the file. This will automatically extract and start the installation process. Follow the instructions on the screen to continue the installation.

if there is a link error please report to us via the Contact. Thank you for your participation in downloading the latest printer drivers download for your Printer so that your driver and software are always updated.

Useful link (if you need), learn more below for other Printer drivers:

• Brother Printer Driver
• HP Printer Driver
• Canon Printer Driver
• Epson Printer Driver
• Samsung Printer Driver
• Sharp Printer Driver